Intimo Wax heater with Non Stick Container

Usage:
(1) Place suitable wax beans or wax can into the wax heater then put on the warmer lid.
(2) Plugin and turn on the heater (make sure the voltage the same with the warmer).
(3) Set the temperature of the heater to the highest setting “10” until wax is fully melted (it may need 0-15Min for 100G wax ). The indicator light will be ON when the heater is heating up and OFF once it’s reached the selected temperature.
(4) Lower the temperature to “5” and let cool. Adjust as needed.
(5) Test small amount of the wax on your wrist before using .Make sure wax isn’t too hot.
(6) Apply the thin layer of wax with spatula to the area in the direction end on growth, and allow wax to cool a few seconds.
(7) Hook up one side of wax with the spatula. Quickly peel off the wax opposite the direction of hair growth. If wax begins to crack when peeling it means it has cooled for too long.)
(8) When finished waxing turn dial to “”position and cover warmer lid to keep the wax dust-free. Unplug heater.

WAX HEATER MAINTENANCE
Cleaning:
a. Put napkin into waxing pot.
b. Clean waxing pot with the spatula.
C. Wipe with a dry napkin.
• Cleaning must be done while the heater is on and wax is melting.
Your heater is virtually maintenance free.No lubrication is needed. Proper maintenance will ensure dependable service and clean appearance.
• Disconnect heater from power source every evening.
If any abnormal conditions occur, unplug the warmer ,allow to cool and return it to the manufacturer or to an authorized service representative for repair.